Data acquisition system for chemical kinetic studies

A microcomputer-interfaced data acquisition system for chemical kinetics (interfacing with laboratory analogue instruments) has been developed. Analogue signals from instruments used in kinetics experiments are amplifed by a wide-range adjustable high-gain operational amplifier and smoothed by an op-based filter, and then digitized at rates of up to 10⁴ samples per channel by an ADC 0816 digitizer. The ADC data transfer and manipulation routine was written in Assembler code and in high-level language; the graphics package and data treatment package is in Basic. For the various sampling speeds, all of the program can be written using Basic-Assembler or completely in Assembler if a high sampling rate is needed. Several numerical treatment methods for chemical kinetics have been utilized to smooth the data from experiments.The computer-interfaced system for second-order chemical kinetic studies was applied to the determination of the rate constant of the saponification of ethyl acetate at 35°C. For this specific problem, an averaging treatment was used which can be called an interval method. The use of this method avoids the diffcully of measuring the starting time of the reaction. Two groups of experimental data and results were used to evaluate the systems performance. All of the results obtained are in agreement with the reference value.     

基于Simulink环境的壳管式换热器动态特性的分析

壳管式换热器在化工和食品行业中有着广泛的应用,对其分析的方法与手段也有很多。在本文中,作者尝试建立起壳管式换热器的传递函数,并利用Matlab分析软件中的Simulink模块对其分析与仿真,通过得到的动态特性仿真曲线,为提高换热器的使用效率提供一些依据。     

宏观过程的方向与限度——可逆性判据(Ⅱ)

本文从平衡判据的普遍规律--克劳修斯不等式出发,按照不同的过程条件,分别讨论了熵判据、亥氏函数和吉氏函数判据以及相变化和化学变化的可逆性判据.同时指出了这些平衡判据所包含的物理意义及它们间的一些内在联系.     

精细管理规范运作推进油田持续有效发展

介绍了江苏油田分公司推行全面预算管理,有效降低生产成本,规范会计基础工作,提升财务管理水平,实施精细成本管理,夯实油田有效、和谐发展的科学管理方法.     

甲基吡啶气相氨氧化V系催化剂研究进展

综述了国内外甲基吡啶气相氨氧化制氰基吡啶V系催化剂的研究进展。在甲基吡啶气相氨氧化中,V系催化剂可以以非负载和负载两种形式起作用。负载型V系催化剂因其机械强度、热稳定性和寿命更优异而得到更加广泛的应用和研究。     

组分对发射盐物相、浸渍温度和稳定性的研究

311、411、612、2.4：0．6：1是常用的阴极钪酸盐（Ba：Ca：Al2摩尔比，分别添加微量Sc2O3）配比。相同工艺条件，4种配比钪酸盐的衍射峰区别不大；相同温度条件，2．4：0．6：1的阴极钪酸盐对纯钨基的浸渍度最高，达到99．34％；同时24：0．6：1的阴极钪酸盐在空气中的稳定性也是最好的。     

BaTiO3系PTC热敏电阻用施主加入物的研究

阐述了常用的施主加入物、施主加入量、影响施主加入量的主要因素及各施主加入物的特点。研究了常用的施主加入物的理化指标对ＰＴＣ热敏电阻性能的影响，并据此提出了其技术标准。     

Finite-time consensus of multiple second-order dynamic agents without velocity measurements

This article considers the finite-time consensus of multiple second-order dynamic agents without velocity measurements. A feasible protocol under which each agent can only obtain the measurements of its position relative to its neighbours is proposed. By applying the graph theory, Lyapunov theory and the homogeneous domination method, some sufficient conditions for finite-time consensus of second-order multi-agent systems are established under the different kinds of communication topologies. Some examples are presented to illustrate the effectiveness of the theoretical results.     

Isothermal crystallization kinetics and melting behavior of multiwalled carbon nanotubes/polyamide‐6 composites

Pristine and functionalized multiwalled carbon nanotubes (MWNTs) were used to fabricate polyamide 6 (PA6) composites through melt blending. The functionalized MWNTs were obtained by grafting 1,6‐hexamethylenediamine (HMD) onto the pristine MWNTs to improve their compatibility with PA6 matrix. The effect of MWNTs on the isothermal crystallization and melting behavior of PA6 was investigated by differential scanning calorimetry (DSC) and X‐ray diffraction (XRD). The Avrami and Lauritzen–Hoffmann equations are used to describe the isothermal crystallization kinetics. The values of the Avrami exponent found for neat PA6, the pristine MWNTs/PA6 and functionalized MWNTs/PA6 composite samples are about 4.0, 1.7, and 2.3, respectively. The activation energies are determined by the Arrhenius method, which is lower for the composites, ?320.52 KJ/mol for pristine MWNTs/PA6 and ?293.83 KJ/mol for functionalized MWNTs/PA6, than that for the neat PA6 (?284.71 KJ/mol). The following melting behavior reveals that all the isothermally crystallized samples exhibit triple melting endotherms at lower crystallization temperature and double melting endotherms at higher crystallization temperature. The multiple melting endotherms are mainly caused by the recrystallization of PA6 during heating. The resulting equilibrium melting temperature is lower for the composites than for neat PA6. In addition, polarizing microscopy (PLM) and small angle light scanning (SALS) were used to study the spherulite morphology. The results show that the MWNTs reduce the spherulite radius of PA6. This reduction is more significant for pristine MWNTs. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

建筑陶瓷的装桢与软件复用技术的应用——三维虚拟展示系统的开发

在软件复用基本理论和技术的基础上，阐述了软件体系结构对软件复用的意义，提出了基于软件体系的软件复用开发方法以及在建筑陶瓷三维虚拟展示系统开发过程中的应用。